P40 Agricultural Drone, XAG

Περιγραφή

It’s an ever-evolving technology based on years’ practical experience in fields. The all-new XAG P40 is crafted into an ultimate balance between precision, efficiency, cost and safety.

Manual approach: imprecise, low efficiency, labor intensive and operator exposure to chemicals

Large grounds based machinery: imprecise, crop damage, soil compaction, only for plain field

Manned aircraft: chemical drifting, costly, high operational cost, runway infrastructure needed

XAG P40 Agricultural UAS: high, all-terrain autonomous operation, revolutionary efficiency, flexible operation

Compatible with both XAG iRASS Spraying System and JetSeed™ Granule Spreading System, XAG P40 is built to broaden the application scenarios of precision technology in agriculture. From seeding, crop spraying to granular spreading, nothing is wasted, just the right amount of everything precisely delivered to where you need it.

UNRIVALLED EFFICIENCY UPGRADED BY 29%
THE LARGEST PAYLOAD EVER DESIGNED

Through countless research and experiments, the 20L smart liquid tank is designed to create a perfect balance between higher payload and enhanced mobility, improving aerial spraying performance by 29%. Operation efficiency is taken to an unprecedented new level.

Efficiency Breakthrough

Maximum Capacity：20L liquid / 16L granule
Spray Width*: Rapid Spray 7m, Fine Spray 4.5m
Working Efficiency*: Rapid Spray 18ha/hr, Fine Spray 10ha/hr

Better Compatibility

Multi-purpose: Easy switch between spray and spread.
Flexible Capacity: 12L/16L/20L liquid / 16L granule

*Water sensitive paper droplet tests: fine spray ≥15 droplets/m², rapid spray ≥5 droplets/m². *Rapid Spray efficiency is calculated in 12L/ha dosage, 7m width and 7m/s flight speed; Fine Spray efficiency is calculated in 12L/ha dosage, 4.5m width and 6m/s flight speed.

 

HIGH PERFORMANCE POWERTRAIN
15% STRONGER THAN PREVIOUS GENERATION

The most powerful yet, XAG P40 is reinforced by larger-size slow-rotating propellers and more powerful motors to support higher payload without sacrificing flight agility and stability. FOC Vector ESCs accurately control the power output to achieve superior energy efficiency. Thanks to the flexible motor connection structure, propeller vibration is further diminished to ensure operational safety.

 

40 inch
Low-noise Propeller

High-performance
Motors

Flexible Motor
Connection

FOC Vector
ESCs

Standard Mode

Spot Mode

Customised Mode

ALL IN ONE SMARTPHONE
REFINED USER EXPERIENCE AT YOUR FINGERTIPS

Through countless research and experiments, the 20L smart liquid tank is designed to create a perfect balance between higher payload and enhanced mobility, improving aerial spraying performance by 29%. Operation efficiency is taken to an unprecedented new level.

AI Prescription Map for Variable-rate Application

Based on data captured from RGB/MultiSpectrum Camera and the recognition result from XAG AI engine, the Prescription Map will be automatically generated to guide XAG P40 for spraying or spreading on wherever needed.

Customise Your Operational Parameters

Click on the targeted field, pre-set flight and spraying parameters and select appropriate operational flight path simply through the XAG Agri App.

Cloud OTA Upgrades

Support Over-the-Air (OTA), to enjoy the latest functions and services of XAG P40 through instant software and firmware upgrades.

1-on-5 Swarm Operation

One operator can control up to five XAG P40 UASs simultaneously. This maximises working efficiency, especially when large-scale operation is needed.

WG1 Wireless Gateway

• App Connection for Autonomous Operation. 2.5km Communication Range
• WIFI Signal Repeat. Dynamic Control Range Expansion
• Support 4G Mobile Network and WIFI Hotspot
• Support GPS Positioning and External Power Supply

ACS2 ControlStick

• Button-based Manual Control
• Support Flight Path Upload to Smartphone
• Provide Handheld RTK Mapping (Optional)
• Small Field Operation without Mapping
• Support 4G Mobile Network

THE WORLD’S LEADING INDUSTRIAL DESIGN
WITH SUPERIOR PERFORMANCE

Based on our profound consumer insights and unique thinking of ergonomics, XAG P40 inherits XAG’s classic design DNA, with sophisticated improvements for airframe structure and material application. It’s the pioneering design that redefines industry standards.

WORRY-FREE SUPERCHARGE ENDLESS POWER ON THE GO

XAG P40 is powered by a 13-cell high-density Li-Po smart. The smart battery has a built-in XBMS intelligent battery management system which consistently monitors battery life and reassure charging safety. With only two B13860S Smart Batteries and one GC4000 Auto SuperCharge Station, non-stop field operation can be secured through continuous recharging cycle.

No-waiting
Water Cooling

IP67
Apsauga

865,8 Wh
Capacity

15 min
3C SuperCharge

LESS WAITING. MULTIPLE CHARGING
OPTIONS TO SAVE YOUR TIME

Lightweight, stronger and more flexible

• 3000W Rated Power. 15min SuperCharge*.
• Support two batteries at the same time.
• Variable frequency generator, ultra high fuel economy
• Max. 20 batteries fully charged with 10L full tank of petrol
• The light-weight gasoline generator, 26.5kg in net weight
• XBMS intelligent battery management system, safe and reliable

CM12500 Intelligent SuperCharger

• 2500W Rated Power, 18min SuperCharge
• XBMS intelligent battery management system

*Laboratory research shows, under general operating conditions, the GC4000 Auto SuperCharge Station can fully charge a B13860S SuperCharge Battery within 15min. The specific performance may vary depending on the working environment, user habits, daily maintenance, etc.

XAG SMART AGRICULTURE SOLUTIONS, INTEGRATING DRONE, AI AND CLOUD COMPUTING

The perfect convergence of XAG P40 Agricultural UAS, XMission Multifunctional UAS and XAG Agriculture Intelligence (XAI) creates comprehensive smart agriculture solutions that are tailored to every user’s personal needs.

XMission Works for 3D Mapping, Effortless

• Parameter pre-setting on smartphone.
• Centimetre-level mapping, terrain-adaptive.
• Support RGB and multi-spectrum camera

Digital Field Map Processing

• XStation for on-site processing, quick & offline.
• Encrypted cloud computing, high-speed & large-scale.
• Generating HD Ortho Map and 3D Model.

XAI Cloud/Edge Recognition,
All Happen in Seconds

• Identify field boundaries and obstacles.
• Fruit tree locating, specific into centre and perimeter.
• Identify weed/pest disease.
• Identify cotton boll opening rate.

XAG P40 Autonomous Operation,
Precision with Ease

• Large-scale, discriminating operation.
• AI Prescription Map for Variable-rate Application

CLOUD PLATFORM SUPERVISION, TAKE INDUSTRY STANDARDS TO NEW LEVEL

XCloud is a visualised platform specifically built to regulate drone operation and manage flight information. Connected to the civil aviation authorities, it supports geo-fencing, no-fly zone self-check, remote locking and real-time tracking of equipment status (e.g., location, owner, operator and flight records). In line with the national safety requirement, all operator needs to be certified and each operating UAS should be registered through real-name authentication.

Spray, Spread, Protect and Restore Applications with Unlimited Possibilities

THE TRUE TECHNOLOGY SELECTED BY 6.37
MILLION FARMING HOUSEHOLDS

Every detail in our design is crafted with care for farmers and repeatedly tested in the farmlands. This is how we create precision and efficiency that set XAG P40 apart. Having introduced such state-of-the-art technology into the remote rural areas, XAG has empowered 6.37 million farmers with smart agriculture solutions.

Symmetrical Motor Wheelbase
1680 mm

Overall Dimensions
1,380×1,355×552mm (when the propellers are folded,with 20L liquid container)
2195×2210×552mm (when the propellers are unfolded,with 20L liquid container)

Transport Dimensions
1160 × 760 × 610 mm

Weight
Bare weight:19.27kg (Excluding battery and liquid container)
Deadweigt:26.62kg (Including battery and empty liquid container)

Arm Material
Carbon glass fiber

Waterproof Grade
IP67 (including battery)

Volume
Rated：19L/Loaded to Capacity：20L

Working Volume
Rated：19L/Loaded to Capacity：20L

NOZZLE

Model
SNZ-18000A

Quantity
4

Rotating Speed Of Spray Tray
2000~16000 r/min

Atomizing Size
90-550μm (according to operation requirements)

Spray Width
Precision spraying: 4.5m
Quick spraying: 7.0m

Quantity
4

Voltage
42 V

Maximum System Flow Rate
7.2 L/min

Maximum flow rate(single pump)
1.8 L/min

Model
JS-1

Capacity
16L

Weight
2.5 kg

Waterproof Grade
IP55

Operating Temperature
-20° – 60° C

Storage Temperature
-10° – 40° C

Valid Width
2.5～4.5 m

Rotation Speed Of Rolling Feeder
20～80 r/min

Air Speed Of Feeding
0-18 m/s

Applicable Granule Size
1-10 mm (solid granule)

Model
RD2447

Power Consumption
4Wx2

Sensing Mode
Millimeter-wave imaging, MTMR

Sensing Parameters
Obstacle’s position, distance, direction of movement, relative speed

Sensing Range
≥1 cm @1.5~30m
*Subject to the material, shape, size, position, etc. of the target object

Field Of View (FOV)
Horizontal ±35°, vertical ±35°

Obstacle Avoidance Direction
Obstacle avoidance based on flight direction (front and rear).

Relative Height Of Safe Obstacle Avoidance
≥ 1.5 m

Relative Speed Of Safe Obstacle Avoidance
≤ 8 m/s

Distance Of Safe Obstacle Avoidance
2.5 m (Distance between the tip of the propeller and the obstacle after the UAV brakes and hovers stably)

Model
TR24S30

Sensing Mode
Millimetre-wave

Height Measurement Range
0.5~30 m

Fixed Height Range
1~30 m

Maximum Gradient
45°(at flight speed of 2m/s)

Model
A20

Dimension (stator)
80×30 mm

KV Value
85 rpm/V

Maximum Tension
22 kg (single)

Rated Power
1,500 W (single)

ELECTRONIC SPEED CONTROLLER

Model
CM12500

Nominal Power
2500 W

Charge Input
AC 90-175V 50/60Hz 16A (Max)
AC 180-260V 50/60Hz 16A (Max)

Charge Output
DC 50-60V/25A(Max)/1250W (AC 90-175V)
DC 50-60V/50A (Max)/2500W (AC 180-260V)

Operating Temperature
﹣10~45℃

Model
GC4000

Dimensions
492 × 407 × 462 mm

Number Of Cylinders
One

Weight
Deadweight：26.5kg(Excluding gasoline and engine oil)
Fullweight:34.3kg(Including gasoline and engine oil)

Startup
Electrical starting

Compression Ratio
8.5:1

Tank Capacity
10 L

Air Intake
Natural Aspiration

Ignition
Spark Ignition

Fuel Consumption
≤0.6L/KW.h(at 25 ℃，0 altitude，92# unleaded gasoline under national standards @charging power of 3KW)

No-load Speed
2600rpm

Noise
≤88db(A)@1M

Rated Shaft Output Power
3KW

Rated charging power
3KW

Service Life
>500 hours

Total Displacement
225CC

Pollutant Emission
GB Stage II